You have no items in your shopping cart.
Standards SC5
| CONTROL PRODUCTS AND COMPONENTS |
| ISO 6301-2:2018 |
| Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier’s literature |
| ISO 4400:1994 |
| Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements |
| ISO 4401:2005 |
| Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces |
| ISO 4411:2019 |
| Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics |
| ISO 5599-1:2001 |
| Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector |
| ISO 5599-1:2001/Cor 1:2007 |
| ISO 5599-2:2001 |
| Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector |
| ISO 5599-2:2001/Amd 1:2004 |
| ISO 5599-2:2001/Cor 1:2007 |
| ISO 5781:2016 |
| Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces |
| ISO 5782-1:2017 |
| Pneumatic fluid power -- Compressed air filters -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| ISO 5782-2:1997 |
| Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| ISO 5783:2019 |
| Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities |
| ISO 6263:2013 |
| Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces |
| ISO 6264:1998 |
| Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces |
| ISO 6301-1:2017 |
| Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| ISO 6301-2:2006 |
| Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| ISO 6358-1:2013 |
| Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow |
| ISO 6358-2:2013 |
| Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods |
| ISO 6358-3:2014 |
| Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 3: Method for calculating steady-state flow-rate characteristics of systems |
| ISO 6952:1994 |
| Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements |
| ISO 6953-1:2015 |
| Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements |
| ISO 6953-2:2015 |
| Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| ISO 6953-3:2012 |
| Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
| ISO 7368:2016 |
| Hydraulic fluid power -- Two-port slip-in cartridge valves -- Cavities |
| ISO 7789:2007 |
| Hydraulic fluid power -- Two-, three- and four-port screw-in cartridge valves -- Cavities |
| ISO 7790:2013 |
| Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 -- Clamping dimensions |
| ISO 8778:2003 |
| Pneumatic fluid power -- Standard reference atmosphere |
| ISO 9461:1992 |
| Hydraulic fluid power -- Identification of valve ports, subplates, control devices and solenoids |
| ISO 10041-1:2010 |
| Pneumatic fluid power -- Electro-pneumatic continuous flow control valves -- Part 1: Main characteristics to include in the supplier's literature |
| ISO 10041-2:2010 |
| Pneumatic fluid power -- Electro-pneumatic continuous flow control valves -- Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| ISO 10094-1:2021 |
| Pneumatic fluid power -- Electro-pneumatic pressure control valves -- Part 1: Main characteristics to include in the supplier's literature |
| ISO 10094-2:2021 |
| Pneumatic fluid power -- Electro-pneumatic pressure control valves -- Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| ISO 10372:1992 |
| Hydraulic fluid power -- Four- and five-port servovalves -- Mounting surfaces |
| ISO 11727:1999 |
| Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components |
| ISO 12238:2001 |
| Pneumatic fluid power -- Directional control valves -- Measurement of shifting time |
| ISO 15217:2000 |
| Fluid power systems and components -- 16 mm square electrical connector with earth contact -- Characteristics and requirements |
| ISO 15218:2003 |
| Pneumatic fluid power -- 3/2 solenoid valves -- Mounting interface surfaces |
| ISO 15407-1:2000 |
| Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector |
| ISO 15407-2:2003 |
| Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector |
| ISO 16873:2011 |
| Hydraulic fluid power -- Pressure switches -- Mounting surfaces |
| ISO 16874:2004 |
| Hydraulic fluid power -- Identification of manifold assemblies and their components |
| ISO 17082:2004 |
| Pneumatic fluid power -- Valves -- Data to be included in supplier literature |
| ISO/TR 17209:2013 |
| Hydraulic fluid power -- Two-, three- and four-port screw-in cartridge valves -- Cavities with ISO 725 (UN and UNF) threads |
| ISO 20401:2017 |
| Pneumatic fluid power systems -- Directional control valves -- Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |